👻 Open Bot

Buying & Selling

GHOSTwire supports both manual trading and automated sniping. Buy any Solana token instantly, sell with custom amounts, and let auto-sell handle your take profits.

Fee System

Each trade has a 0.5% fee. Whitelisted users pay 0%. Fees are automatically collected and distributed to referrers (20% commission).

Auto-Snipe: When Channels Trigger Buys

This is the core feature of GHOSTwire. Once you add a channel, the bot monitors it 24/7 and automatically buys when a token contract is detected.

How Auto-Snipe Works
📡 Channel Message → 🔍 Extract CA → ✅ Check Holding → 💰 Check Balance → 🔥 Execute Buy → 📨 Send Notification

Public Channels

Any public Telegram channel can be added. The bot uses a dedicated monitor account to read messages.

Public Channel Flow:

  • Add channel via Add Channel → Public
  • Bot joins the channel automatically
  • Every new message is scanned for Solana addresses
  • When CA found → auto-snipe triggers
Note

Public channels work immediately. No authentication needed.

📡 Public Channel: @crypto_signals
@crypto_signals: 🚀 NEW GEM ALERT! 🚀 Contract: GNL7MQSzzksbfuquHTJuiDPVXvXpfxBfHfu1mQGhpump Good luck!
👻 GHOSTwire
🔥 Sniping token! GNL7MQSz...pump Amount: 0.01 SOL 💰 Fee: 0.5% ⏳ Executing buy...
🟢 BUY EXECUTED! Token: LUCY Amount: 12,096.07 Spent: 0.010000 SOL TX: 4TEoNH4n9ae73gz6DFWB...

Private Channels

Private channels require you to authenticate your Telegram account first (QR or OTP). The bot then monitors using YOUR session.

Private Channel Prerequisites:

  • Complete TG Auth (QR code or OTP)
  • Add channel via Add Channel → Private
  • Bot uses your session to read the private channel
  • Same auto-snipe logic applies
Important

You must be a member of the private channel. Bot cannot join private channels automatically.

🔒 Private Channel: @vip_signals
@vip_signals: 🔐 VIP ALPHA 8xKp7YqVzRcT2NmLw9JfHdG3QbXvC6nM1aRtYbE5uIoP Don't sleep on this one.
👻 GHOSTwire
🔥 Sniping token! 8xKp7YqV...IoP Amount: 0.025 SOL (W2) 💰 Fee: 0.5% ⏳ Executing buy...
🟢 BUY EXECUTED! Token: DOGE Amount: 5,000.00 Spent: 0.025000 SOL TX: 8xKp7YqVzRcT2NmLw...

Auto-Snipe Settings

🔫
Global Auto-Buy Toggle
Main Menu → Settings → Auto-Buy. Turn OFF to stop all auto-snipes while keeping channels added.
📡
Per-Channel Wallet
Each channel can use a different wallet. W1 for conservative signals, W2 for high-risk memes.
📊
Per-Channel Slippage
Set higher slippage (15-20%) for volatile meme coin channels. Lower (5-10%) for established tokens.
🎯
Per-Channel Take Profit
Different profit targets per signal source. Meme channels: 100%+. Blue chip channels: 30%.
Anti-Duplicate Protection

GHOSTwire prevents buying the same token twice within 48 hours. This protects you from FOMO buys after price pumps and multiple channels posting the same signal.

⏭️ Already holding GNL7MQSz... Bought 2.5 hours ago. Skipping buy.
Daily Trade Limit

You can set a maximum number of auto-trades per day (default: 100). Once reached, auto-snipe pauses until next day. Manual buys are still allowed.

Manual Buy Flow

Step 1: Start Buy

Click Buy Token from the main menu.

What you can send:

  • Solana Address — Raw token contract address
  • DexScreener URL — Bot auto-resolves to CA

Type cancel to abort.

@ghowr_bot
📈 Buy Token Send token address or DexScreener URL: Type cancel to abort. « Back
« Back

Step 2: Review & Confirm

Bot checks before buying:

  • Already holding? (48h cooldown)
  • Sufficient SOL balance?
  • Daily limit remaining?
@ghowr_bot
📈 Confirm Buy Token: GNL7MQSz...pump Amount: 0.01 SOL Slippage: 10.0% ✅ Confirm ❌ Cancel
✅ Confirm
❌ Cancel

Step 3: Execution & Result

What happens during execution:

  • Jupiter API quotes the swap
  • Transaction is built and signed
  • Sent to Solana network
  • Bot parses actual tokens received
  • Position saved to database
@ghowr_bot
⏳ Executing buy...
🟢 BUY EXECUTED! Token: LUCY Amount: 12,096.07 Spent: 0.010000 SOL 💰 Fee: 0.000005 SOL (0.5%) TX: 4TEoNH4n9ae73gz6DFWB...
📊 Portfolio Overview • LUCY — 12,096.07 💰 SOL: $0.01 💎 Total: $0.01 📈 Buy 📉 Sell 🔄 Refresh
📈 Buy
📉 Sell
🔄 Refresh
Fee Breakdown Example
Buy Amount: 0.010000 SOL
Fee (0.5%): 0.000005 SOL
→ Referrer (20%): 0.000001 SOL
→ Fee Wallet: 0.000004 SOL
Actual Buy: 0.009995 SOL

Sell Flow

Step 1: Select Token to Sell

Click Sell Token from the main menu.

Two ways to sell:

  • Select from list — Shows all tokens with balance
  • Sell by Address — Manual entry for any token
@ghowr_bot
📉 Select Token to Sell 🔹 LUCY GNL7MQSz...pump — 12,096.07 🔹 DOGE 8xKp7YqV...IoP — 5,000.00 💰 Sell LUCY 💰 Sell DOGE 📝 Sell by Address « Back
💰 Sell LUCY
💰 Sell DOGE
📝 Sell by Address
« Back

Step 2: Choose Amount to Sell

Sell options:

  • 100% — Sell entire position
  • 50% — Sell half
  • 25% — Sell quarter
  • 10% — Take some profit
  • Custom Amount — Enter specific number
@ghowr_bot
📉 Sell LUCY Balance: 12,096.07 Select percentage or enter custom amount: 💰 100% 📊 50% 📉 25% 📝 10% ✏️ Custom Amount « Cancel
💰 100%
📊 50%
📉 25%
📝 10%
✏️ Custom Amount
« Cancel

Step 3: Sell Confirmation

After sell execution:

  • Bot verifies transaction on-chain (12s wait)
  • Updates position (partial sell or close)
  • Records trade with P&L
  • Sends notification with SOL received
@ghowr_bot
🔴 SOLD! Token: LUCY Amount: 6,048.04 (50%) Value: $6.05 SOL Received: 0.005995 SOL 💰 Fee: 0.000003 SOL (0.5%) TX: 8xKp7YqVzRcT2NmLw... 📊 Portfolio Overview • LUCY — 6,048.03 ($6.05) 💰 SOL: $0.015 💎 Total: $6.06
📈 Buy
📉 Sell
🔄 Refresh

Auto-Sell (Take Profit)

Enable auto-sell to automatically close positions when profit targets are reached.

How Auto-Sell Works

Bot monitors active positions every 10 seconds. When profit % reaches your target, it automatically executes a sell.

Auto-Sell Triggers:

  • Take Profit % — Sell at X% profit
  • Target Market Cap — Sell when MC reaches $X
@ghowr_bot
⚙️ Settings • Buy: 0.01 SOL • Slippage: 10% • Take Profit: 50% • Auto-Sell: ✅ ON • Auto-Buy: ✅ ON 💵 Buy Amount 📊 Slippage % 🎯 Take Profit % 🤖 Auto-Sell 🔫 Auto-Buy 🏠 Main Menu
💵 Buy Amount
📊 Slippage %
🎯 Take Profit %
🤖 Auto-Sell
🔫 Auto-Buy
🏠 Main Menu
@ghowr_bot
🎯 Auto-Sell Triggered! Token: LUCY Profit: +52.3% (target: 50%) Amount: 12,096.07 SOL Received: 0.015995 SOL 💰 Fee: 0.000008 SOL (0.5%) TX: 4TEoNH4n9ae73gz6DFWB...

DexScreener URL Support

You don't need to manually extract contract addresses. Just paste any DexScreener URL and GHOSTwire resolves it automatically.

Supported Formats

https://dexscreener.com/solana/8xKp7YqVzRcT2NmLw...
https://dexscreener.com/base/0x1234...

@ghowr_bot
You: https://dexscreener.com/solana/GNL7MQSzzk...
✅ Resolved from DexScreener: GNL7MQSz... 📈 Confirm Buy Token: GNL7MQSz...pump Amount: 0.01 SOL Slippage: 10.0%

Trading FAQ

Why did my buy fail with "0 tokens"?

Some tokens have unusual decimals. GHOSTwire auto-detects decimals but may need a retry. Increase slippage for volatile tokens.

How is the token amount calculated?

Bot fetches the actual transaction from Solana to get the exact tokens received — not just the quote.

What happens if a sell fails?

Bot verifies the transaction on-chain. If failed, your tokens remain safe and you can retry with smaller amount or higher slippage.

Can I sell tokens not bought through GHOSTwire?

Yes! Use Sell by Address — enter any token address you hold, and GHOSTwire will sell your balance.

Why didn't the bot auto-snipe a signal?

Check: 1) Auto-Buy is ON in Settings, 2) Daily limit not reached, 3) Not already holding that token (48h cooldown), 4) Sufficient SOL balance.

← Channel Monitoring Portfolio Tracking →